Accessoires de lubrification

Le pousser and lock fitting is a versatile device that has been designed to provide a solution for a wide range of applications. The fitting has been manufactured from either steel or brass, both of which are known for their durability and strength. The maximum pressure could reach 5Mpa and the thread could be customized.
Pression: 5Mpa
Matériau : acier ou laiton
M8, M10, M12.

Compression fittings(droit,elbow) are required to properly connect and combine different tubes and hoses with one another, allowing for the creation of tight and robust tube systems.The steel material used in its construction ensures that it can withstand the highest levels of pressure.The thread on the adapter can be customized to meet the specific needs of your application.

Il est courant d'utiliser les pinceaux sont fabriqués as lubricant applicators in lubrication systems.They are always located at the end of the lubrication line and directly at the lubrication point, The brush are used in many applications, such as chain lubrication, which will keep the chain supple and prevents corrosion.they are an inexpensive and simple.

Our in-line pressure filters come in two sizes and offer 25 and 125 micron filtration. The Aluminum bowl is easy to disassemble for inspection and replacement, and the sintered brown metal elements are corrosion-resistant and effective at removing contaminants.

Le filtre à graisse est capable de supporter jusqu'à 25 MPa et est construit en acier. Avec une capacité de filtration de 150 microns, ce filtre est très efficace pour capturer et éliminer les particules de la graisse.

LS Filter could remove small particles from grease,which could be used in many systems. Cannot handle corrosive liquids. Withstands up to 25MPa working pressure.The system could fix the indicator pin or the switch to witness the working situation.

Colliers pour tuyaux d'un diamètre de 4 mm à 10 mm.Le matériau est de l'acier commun avec une plaque de zinc en surface.Mais pour les zones corrosives spéciales, nous recommandons le matériau en acier inoxydable.

Le Assembled Hose with Protection Cover is a flexible conduit made up of high-quality materials that ensure durability and resistance to various forms of wear and tear.We could provide the customized length hose assembled based on requirement.The protective cover is also designed to be abrasion-resistant, making it useful in outdoor settings and harsh environments.

Coils, protective helixes or corrugated hoses for protection des tubes avec SS304

A clapet anti-retour is a type of valve that ensures that fluid flows in one direction only.The purpose of the check valve in the block is to prevent backflow from the outlet to the inlet side of the valve system.

Isohitech Lubrication can provide reservoir tanks for lubrication systems in a range of sizes from 1 liter to 4 liters.In addition to providing standard reservoir tank sizes, Isohitech Lubrication can also design and manufacture custom reservoir tanks to meet the specific needs of individual applications.

Casting Alunimum reservoirs can only be used for oil. The reservoirs come in metal designs,which is from 6L to 25L can be equipped with oil level switch. Additionally, it is possible to monitor the minimum or maximum oil level electrically via float switches.